EasyManuals Logo

Twilight Palette Series User Manual

Default Icon
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
5
Handling of this instrument (Continued)
CAUTION
Do not apply water or sample over any part
other than the surface of the prism.
Application on any other part of the instrument
may result in a malfunction.
If this instrument is used to measure very hot or
highly acidic samples, the prism may be
damaged resulting in inaccurate measurements.
The prism is made of optical glass. Do not tap or
contact its surface with any metal tool such as
a spoon or tweezers.
If the surface of the prism is damaged,
inaccurate measurements will occur.
After taking a measurement, completely wipe
off any sample on the surface of the prism and
surrounding area with tissue paper soaked in
water. Then remove any remaining moisture
completely with dry tissue paper.
If you have measured a sample of polymer or
fats and oils, wipe it off with tissue paper
soaked in alcohol or neutral detergent. Then
remove any remaining moisture completely with
dry tissue paper.
When transporting the instrument, place it in its
original box.
When measuring in an area where direct light
and/or strong outdoor sunlight is present, the
ELI warning message [nnn] may be displayed.
If warning message is displayed, cover the
sample stage of the unit and press the
START/OFF Button again to take another
measurement.
Carefully read this book and fully understand the function and operation of each part of the instrument
before use.
Check that each part of the instrument operates normally before use.
Check the necessary operations such as zero setting according to the instruction manual.
The manufacturer shall not be held responsible for any or all damages as a result of use of the
instrument for those other than its intended purposes (measurement of Brix, sugar content,
concentration of liquid).
The prism mounted on the sample stage that is in contact with a sample under measurement is a
consumable item.
Ensure that if use of the instrument has undesired effects on the consumption of the measured
materials, etc., ATAGO shall not be held responsible for the result.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Twilight Palette Series and is the answer not in the manual?

Twilight Palette Series Specifications

General IconGeneral
BrandTwilight
ModelPalette Series
CategoryMeasuring Instruments
LanguageEnglish