TYAN S8010 - Page 52

http://www.tyan.com
52
3.3.5.2.1 Setup LAN Configuration
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Setup LAN Configuration
IP Address Configuration
Save LAN Configuration
[DHCP]
IPMI IP Address Source
STATIC/DHCP
← Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
IP Address Source
Select IPMI IP Address Source.
STATIC / DHCP
NOTE:
IP Address and Subnet Mask appear when IP Address Source is
set to [STATIC].
IP Address / Subnet Mask
Enter Static IP Address / Subnet Mask.
Save LAN Configuration
After setup LAN Configuration, select Save LAN Configuration and click [OK] to
enable changes.