TYAN S8010 - Set Lan Configuration

http://www.tyan.com
51
3.3.5.1 View BMC System Event Log
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Total Number of Entries: xxx
SEL Entry Number
SEL Record ID
SEL Record Type
Event Timestamp
Generator ID
Event Message Format Ver
Event Sensor Type
Event Sensor Number
Event Dir Type
Event Data
[1]
xxxx
xxxx (System Event)
MM DD, YYYY HH:MM:SS
xxxx
xx (IPMI Ver 2.0)
xx (Voltage)
xx
xx
xx xx xx
Use +/- to traverse the
event log.
← Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Read only. It can not be modified in user mode.
3.3.5.2 Set LAN Configuration
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
LAN Configuration Status
Current IP source in BMC
Current IP Address in BMC
Current Subnet Mask in BMC
Current Gateway address in BMC
Current MAC Address in BMC
Setup LAN Configuration
[DHCP]
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xx.xx.xx.xx.xx.xx
xx.xx.xx.xx.xx.xx
← Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Read only. It can not be modified in user mode.