TYAN S8010 - Page 63

http://www.tyan.com
63
Boot Up Num-Lock
Selects Power-on state for Numlock.
On / Off
Wait for ‘F1’ If Error
Waits for F1 key to be present if error occurs.
Enabled / Disabled
Hit ‘DEL’ Message Display
Displays “Press DEL to run Setup in POST”.
Enabled / Disabled
Interrupt 19 Capture
Enabled: allows option ROMs to trap interrupt 19.
Enabled / Disabled
Endless Boot
Enable/Disable endless loop boot from BBS table.
Enabled / Disabled