TYAN S8050 - Page 48

http://www.tyan.com
48
NOTE: When Network Stack was set to Enabled, the following item will appear.
IPv4 PXE Support
Enable/Disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not
be available.
Disabled / Enabled
IPv4 HTTPs Support
Enable/Disable IPv4 HTTPs boot support. If disabled, IPv4 HTTPS boot support will
not be available.
Disabled / Enabled
IPv6 PXE Support
Enable/Disable IPv6 HTTPs boot support. If disabled, IPv6 HTTPS boot support will
not be available.
Disabled / Enabled
IPv6 HTTPs Support
Enable/Disable IPv6 HTTPs boot support. If disabled, IPv6 HTTPS boot support will
not be available.
Disabled / Enabled
PXE boot wait time
Wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or
numeric keys to set the value.
0
Media detect count
Number of times the presence of media will be checked. Use either +/- or numeric
keys to set the value.
1