TYAN S8238 - Page 52

http://www.tyan.com
52
3.3.5 IPMI 2.0 Configuration
BIOS Setup Utility
Main
Advanced
PCI/PnP Boot Security Chipset Exit
IPMI 2.0 Configuration
View all events in the
BMC Event Log.
It will take a max. of 15
seconds to read all BMC
SEL records.
← Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Status of BMC
View BMC System Event Log
Clear BMC System Event Log
Set LAN Configuration
Set VLAN Configuration
Set PEF Configuration
BMC Watch Dog Timer Action
BMC Alert LED and Beep
FW Key
Working
[Disabled]
[Off]
[0000000]
Status of BMC
Read only.
Clear BMC System Event Log
Clear all events in BMC System Event Log.
Set LAN Configuration
Set LAN Configuration Parameters Command.
Set VLAN Configuration
Set VLAN Configuration Parameters Command.
Set PEF Configuration
Set PEF Configuration Parameters Command.
BMC Watch Dog Timer Action
Allows the BMC to reset or power down the system if the operating system crashes
or hangs.
Disabled / Reset System / Power Down / Power Cycle
BMC Alert LED and Beep
BMC Alert LED and Beep.
OFF / ON
FW Key
Enter IPMI FW Key upgrade to IPMI or iKVM function.
[0000000]