NMI Button
Enable or disable the NMI button on the front panel.
Enabled / Disabled
Chassis Intrusion Detection
Disabled: Disable Chassis Intrusion Detection.
Enabled: When a chassis open event is detected, the BIOS will report the event.
Disabled / Enabled
SGPIO Function
Enable or disable the SP5100 SGPIO function.
Enabled / Disabled
Watchdog Mode
POST: Watchdog timer counting, start at Power on, stop at OS Boot
OS: Start at OS Boot
Power on: Start at power on
Disabled / POST / OS / Power On
Watchdog Timer
Watchdog timer sets 2/4/6/8/10/12 minutes.
When WD time-out occurs, system will auto reboot.
2 / 4 / 6 / 8 / 10 / 12
To Next Page
Loading...
