EasyManuals Logo

Tyco DN150 Quick Start Guide

Tyco DN150
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
TFP1321
Page 16 of 18
Limited
Warranty
For warranty terms and conditions, visit
www.tyco-fire.com.
Ordering
Procedure
The TYCO DV-5a Automatic Water
Control Valve Electric Actuation may
be ordered as follows:
Pre-Assembled Valves with
Trim Ordering
DV-5
A
Valves with Galvanized Trim
and Butterfly Valve
(See Figure 5)
Specify: Size (specify), DV-5
a Auto-
matic Water Control Valve, G x G con-
nections with assembled galvanized
Americas Electric Actuation Trim, com-
plete with assembled Model BFV-300
Butterfly Valve, P/N (specify):
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 551010315
2 in. (DN50) ....................551010320
3 in. (DN80) ....................551010330
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 551010340
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 551010360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 551010380
Notes:
Americas pressure switches, P/N 52-287-1-
124 Solenoid Valve, and psi/kPa water pres-
sure gauges are provided.
This arrangement is available for EMEA and
APAC upon request. Contact your local
distributor.
AMERICAS
DV-5
A
Valves with Galvanized Trim
(See Figure 5)
Specify: Size (specify), DV-5
a Auto-
matic Water Control Valve, (specify)
end connection with assembled gal-
vanized Americas, Electric Actuation
Trim, P/N (specify):
Grooved x Grooved
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 550010315
2 in. (DN50) ....................550010320
3 in. (DN80) ....................550010330
4 in. (DN100)....................550010340
6 in. (DN150)....................550010360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 550010380
Flange x Flange ANSI
3 in. (DN80) ....................550020330
4 in. (DN100)....................550020340
6 in. (DN150)....................550020360
8 in. (DN200) ...................550020380
Flange x Grooved ANSI
3 in. (DN80) ....................550030330
4 in. (DN100)....................550030340
6 in. (DN150)....................550030360
8 in. (DN200) ...................550030380
T x T NPT
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 550060315
2 in. (DN50) ....................550060320
Note: Pressure switches, P/N 52-287-1-124
solenoid valve, and psi/kPa water pressure
gauges are provided.
Separate DV-5
A
Valves without Trim
See Table A for flange drilling
specifications.
Specify: Size (specify), DV-5
a Auto-
matic Water Control Valve, (specify)
end connection, P/N (specify):
Groove x Groove
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 530010015
2 in. (DN50) ....................530010020
3 in. (DN80) ....................530010030
4 in. (DN100)....................530010040
6 in. (DN150)....................530010060
8 in. (DN200) ...................530010080
Flange x Flange ANSI
3 in. (DN80) ....................530020030
4 in. (DN100)....................530020040
6 in. (DN150)....................530020060
8 in. (DN200) ...................530020080
Flange x Groove ANSI
3 in. (DN80) ....................530030030
4 in. (DN100)....................530030040
6 in. (DN150)....................530030060
8 in. (DN200) ...................530020080
T x T NPT
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . .530060015
2 in. (DN50) ....................530060020
Notes:
Valves are typically provided with flange
drilling per ANSI B16.1 (Class 125) or ISO
(7005-2 PN16).
Upon request, valves can be provided with
flange drilling per JIS B 2210 or AS 2129. In
which case part numbers are not assigned.
DV-5
A
Valve Trim Semi-Assembled
(See Figure 6)
Specify: Size (specify), finish (specify),
Electric Actuation Trim for DV-5
a Auto-
matic Water Control Valves used in
Deluge Fire Protection System, P/N
(specify):
Galvanized
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . .540000320
2 in. (DN50) ....................540000320
3 in. (DN80) ....................540000330
4 in. (DN100)....................540000340
6 in. (DN150)....................540000360
8 in. (DN200) ...................540000380
Black
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . .542000320
2 in. (DN50) ....................542000320
3 in. (DN80) ....................542000330
4 in. (DN100)....................542000340
6 in. (DN150)....................542000360
8 in. (DN200) ...................542000380
EMEA
DV-5
A
Valves with Galvanized Trim
Specify: Size (specify), DV-5
a Auto-
matic Water Control Valve, (specify)
end connection with assembled gal-
vanized EMEA, Electric Actuation Trim,
P/N (specify):
Grooved x Grooved
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 5 50110 315
2 in. (DN50) ....................5 501103 20
3 in. (DN80) ....................55 011033 0
4 in. (DN100). . . . . . . . . . . . . . . . . . . . 5 501103 40
6 in. (DN150). . . . . . . . . . . . . . . . . . . . 55 01103 60
165,1 mm ......................55 01103 66
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 5501103 80
Flange x Flange ANSI
3 in. (DN80) ....................550120330
4 in. (DN100)....................550120340
6 in. (DN150)....................550120360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 550120380
Flange x Grooved ANSI
3 in. (DN80) ....................550130330
4 in. (DN100)....................550130340
6 in. (DN150)....................550130360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 550130380
Flange x Flange ISO
3 in. (DN80) ....................550140330
4 in. (DN100)....................550140340
6 in. (DN150)....................550140360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 550140380
Flange x Grooved ISO
3 in. (DN80) ....................550150330
4 in. (DN100)....................550150340
6 in. (DN150)....................550150360
8 in. (DN200) . . . . . . . . . . . . . . . . . . . 550150380
T x T ISO
1 1/2 in. (DN40) . . . . . . . . . . . . . . . . . 550170315
2 in. (DN50) ....................550170320
Note: Pressure switches, P/N 52-287-1-124
solenoid valve, bar/psi water pressure
gauges, and NPT to ISO threaded trim adap-
tors for external connections are provided.
VdS and LPCB Approved DV-5A
Valves with Galvanized Trim
Specify: VdS and LPCB Approved,
Size (specify), DV-5
a Automatic Water
Control Valve, (specify) end connec-
tion with assembled galvanized Elec-
tric Actuation Trim, P/N (specify):
Grooved x Grooved
1 1/2 in. (DN40) ..............550110315VDS
2 in. (DN50) ................ 5 501103 20VDS
3 in. (DN80) ................ 550110330VDS
4 in. (DN100)................ 5501103 40V DS
6 in. (DN150)................ 5501103 60V DS
8 in. (DN200) ............... 550110380VDS
Flange x Flange ANSI
3 in. (DN80) ................ 550120330VDS
4 in. (DN100)................ 550120340VDS
6 in. (DN150)................ 550120360VDS
8 in. (DN200) ............... 550120380VDS
Flange x Grooved ANSI
3 in. (DN80) ................ 550130330VDS
4 in. (DN100)................ 550130340VDS
6 in. (DN150)................ 550130360VDS
8 in. (DN200) ............... 550130380VDS
Flange x Flange ISO
3 in. (DN80) ................ 550140330VDS
4 in. (DN100)................ 550140340VDS
6 in. (DN150)................ 550140360VDS
8 in. (DN200) ............... 550140380VDS
Flange x Grooved ISO
3 in. (DN80) ................ 550150330VDS
4 in. (DN100)................ 550150340VDS
6 in. (DN150)................ 550150360VDS
8 in. (DN200) ............... 550150380VDS
T x T ISO
1 1/2 in. (DN40) ..............550170315VDS
2 in. (DN50) ................ 550170320VDS
Note: EMEA pressure switches, P/N 52-287-
1-124 solenoid valve, bar/psi water pressure
gauges, NPT to ISO threaded trim adaptors
for external connections, and VdS and LPCB
required water column prevention drain
components are provided.

Other manuals for Tyco DN150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tyco DN150 and is the answer not in the manual?

Tyco DN150 Specifications

General IconGeneral
BrandTyco
ModelDN150
CategoryControl Unit
LanguageEnglish

Related product manuals