9
Access Control Module
The Access Control Module (ACM-SE) is an access control module which links Readers, Inputs, and Outputs. The ACM-SE
has 8 different sections that contain the components needed for a door. The iSTAR Ultra G2 can have up to 4 ACM-SEs.
Figure 3 displays components on the right-side of the ACM-SE. Figure 4 displays components on the left-side of the ACM-SE.
For more information on ACM board components, see the
iSTAR Ultra G2 Installation and Configuration Guide
.
NOTE
The iSTAR Ultra G2 SE ACM does not communicate with legacy iSTAR Ultra controllers running in iSTAR Pro mode.
Figure 3:Right-hand-side of the ACM-SE
To Next Page
Loading...
