11
Readers
The iSTAR Ultra G2 SE is compatible with Wiegand readers, RS485 readers, and TST-100 readers.
Wiegand Readers
Figure 5 shows direct Wiegand signaling read head connections.
Figure 5:Wiegand Readers
RS485 Readers
Figure 6 shows RS485 full duplex and half duplex reader connections.
Figure 6:RS485 Readers
TST-100 Readers
Figure 7 shows TST-100 connections for smart-mode.
■ For smart-mode, wire the reader using RS485 full-duplex connections, as shown in Figure 7
■ Fore RM-mode, wire the reader using RS485 half-duplex connections, as shown in Figure 6.
Figure 7:TST-100 Reader (Smart Mode)
To Previous Page
Loading...
