Tyco MX Series - User Manual

© 2009 Tyco Safety Products PAGE 1 of 40
MX/MZX
17A-04-S
17 10/09
Registered Company: Thorn Security Ltd. Registered Office: Dunhams Lane Letchworth Garden City Hertfordshire SG6 1BE
EQUIPMENT:
PUBLICATION:
ISSUE No. & DATE:
‘MX/MZX’ ADDRESSABLE FIRE CONTROLLERS
SERVICE AND MAINTENANCE INSTRUCTIONS FOR VERSION 17
LIST OF CONTENTS
1. GENERAL INFORMATION 3
2. ROUTINE CHECKS 4
2.1 GENERAL 4
2.2 WEEKLY CHECKS 4
2.3 THREE-MONTHLY CHECKS 4
2.4 ANNUAL CHECKS 5
2.5 THREE-YEARLY CHECKS 5
2.6 FOUR-YEARLY CHECKS 5
3. CONTROLLER FUNCTIONS 5
3.1 GENERAL 5
3.2 MOVING THE CURSOR 5
3.3 ENTERING INFORMATION 5
3.3.1 ENTERING PASSCODES 10
3.4 POINT DEFINITIONS 10
3.5 VALID VALUES 10
3.6 MAIN MENU 11
3.7 ACCEPT EVENTS 11
3.8 VIEW STATUS 11
3.9 ISOLATE/DE-ISOLATE 13
3.10 TIME/DATE 15
3.10.1 SET TIME/DATE 15
3.10.2 SUMMER/WINTER 15
3.11 EVENT LOG 15
3.11.1 VIEW EVENT LOG 15
3.11.2 PRINT EVENT LOG 16
3.11.3 FILTER 16
3.12 VIEW/PRINT DATA 16
3.12.1 VIEW/PRINT POINTS
ISOLATED 17
3.12.2 VIEW/PRINT POINTS
UNTESTED/FAILED 17
3.12.3 VIEW/PRINT POINT VALUES 17
3.12.4 VIEW FAULTS 17
3.12.5 VIEW LOOP POINT
COUNTERS 18
3.12.6 POINTS FORCED 19
3.12.7 ACTIVE POINTS 19
3.12.8 BY FUNCTION 20
3.13 SERVICE 21
3.13.1 WALK TEST 21
3.13.2 MAINTENANCE 23
3.13.3 DIAGNOSTICS 25
3.13.4 CONFIGURE DDM800 27
3.13.5 RESTART SYSTEM 27
3.13.6 SWITCHES 28
3.14 CONFIGURATION 29
3.14.1 CHANGE TEXT 29
3.14.2 INSERT POINT 33
3.14.3 DELETE POINT 34
3.14.4 MODIFY POINT 34
3.14.5 AUTOCONFIGURATION 35
3.15 TEST BUZZER/LEDs/
DISPLAY 37
4. DEFAULT SYSTEM POINTS 38
4.1 LOCAL I/0 (Field Interface Module/
CPU) 38
4.2 RBUS 39
4.3 ADDRESSABLE LOOP 37
5. DEVICE IDENTIFICATION AND
UNIVERSAL ADDRESSES 40

Tyco MX Series Specifications

General

Type	Fire Alarm Control Panel
Output Voltage	24 VDC
Protection Class	IP30
Networkable	Yes
Operating Temperature	0°C to 49°C
Storage Temperature	-10°C to +60°C
Input Voltage	120/240 VAC, 50/60 Hz

Summary

General Information and Overview

Routine Maintenance Checks

Routine Checks: General Procedures

General guidelines for performing routine checks on the fire controller system.

Weekly Maintenance Checks

Details for conducting essential weekly checks of the controller and associated equipment.

Annual Maintenance Checks

Annual inspection and testing requirements for the fire control system and detectors.

Four-Yearly Battery Replacement

Requirement for renewing internal standby batteries every four years.

Controller Functions

Controller Functions: General

General introduction to the controller's built-in functions and parameter access.

Entering Information and Passcodes

Procedures for entering data, including passcodes, via the keypad.

Main Menu Navigation

Details on accessing and navigating the main menu structure of the controller.

Viewing System Status

How to view the operational status of points and zones on the system.

Service Operations

Covers essential service operations including walk tests and diagnostics.

Default System Point Definitions

Local IO Points

Definition of default points for Local I/O (Field Interface Module/CPU).

RBUS Points

Definition of default points for the RBUS communication bus.

Addressable Loop Points

Definition of default points for the addressable loop.

Device Identification and Addressing