Tylo SENSE SPORT COMBI 4 - Page 14

12
Figure 12: Lock screws for bracket
11. Attachtheoattothelidbyscrewingtheupperscrewtightly
into the threads. Do not forget the spacer on the bottom
side(seegure13)
Figure 13: Attach the oat
12. Fit the cover for the water reservoir and herb grille (see
Figure14).Takecarenottodamagetheoat.
8. Attach the bracket and spacers to the wall following the spec-
ieddimensioning(seeFigure10).
1
2
3
3
4
Figure 10: Bracket with screws and spacers
1. 570 mm
2. 280 mm
3. 185 mm
4. 102 mm (minimum distance to wall)
9. Hang up the heater on the bracket see Figure 11.
Figure 11: Hang up the heater.
10. Lock the heater into place with two lock screws
(see Figure 12).
Figure 14: Fit the cover for the water reservoir and herb grille