C
TRACTOR INSTRUMENTS
C
▶ LOWERING SPEED CONTROL
KNOB
This can be used to adjust the lowering
speed of the implement.
Adjust the lowering speed according to
the implement type and working
environment.
<Operation>
• Rotavator - Slow the lowering speed.
• Plow - Speed up the lowering speed.
• Decreasing lowering speed – Turn
the knob clockwise (slower).
• Increasing lowering speed – Turn the
knob counterclockwise (faster).
• Lock – Turn the knob clockwise
(slower) to its end.
<Examples of useful conditions
of differential lock>
1. One wheel slips or tractor cannot be
driven forward when moving
into/out of a field.
2. A wheel slips during work requiring
traction, such as plowing.
3. One wheel is stuck into a soft field
and can't escape.
▶ DIFFERENTIAL LOCK PEDAL
The differential lock is a device to lock
the differential system in order to rotate
the left and right wheels at the same
speed.
This function can be used when the rear
wheels slip or one wheel spins.
• To engage – Depressing the pedal.
• To disengage – R
eleasing the pedal.
15
Never use the differential lock when
driving on a road.
A collision or rollover can occur.
Make sure to release it during turning.
Otherwise, it can lead to an injury or
accident.
WARNING
When using the differential lock, run the
engine at a low speed.
If differential lock is still not disengaged
after releasing the differential lock pedal,
gently depress the left and right brake
pedals alternately.
IMPORTANT
HYDRAULIC LOWERING SPEED
CONTROL KNOB
To Next Page
Loading...
