D
OPERATION
D
3
1. Idle engine before stopping it.
2. Turn the key switch to「OFF」
position.
3. Remove key from the switch.
▶ STOPPING ENGINE
After starting engine, idle engine for 5 ~
10 minute so that oil is delivered to each
part of engine.
Hydraulic oil in this vehicle is also used
as transmission fluid.
If the temperature drops in winter so oil
gets cold, its viscosity rises and the
hydraulic pump cannot suck oil in,
causing malfunction.
Make sure to idle the engine in winter
according to the following instructions.
▶ ENGINE IDLING
▶ IDLING IN COLD WEATHER
Proper ventilation is needed when
engine idling is performed indoors.
WARNING
TEMPERATURE TIME
Above 50℉
(10℃ or higher)
5 ~ 10 min.
50℉ ~ 32℉
(10℃ ~ 0℃)
10 ~ 20 min.
32℉ ~ 14℉
(- 0℃ ~ - 10℃)
20 ~ 30 min.
14℉ ~ - 4℉
(- 10℃ ~ -20℃)
30 ~ 40 min.
- 4℉ or less
(- 20℃ or less)
more than 40 min.
STOP
After long or heavy work allow the
engine to idle for 5-10 minutes and turn
the key off.
IMPORTANT
Make sure to apply the parking brake
while idling the engine.
Never idle the engine in a poorly
ventilated area.
It can cause carbon monoxide
poisoning by emissions.
WARNING
If the engine is loaded right after it is
started, it may cause engine stalling and
failure.
Make sure to idle the engine first.
If neglecting to idle the engine, it can
cause:
- seizure of the hydraulic pump
- Failure in the hydraulic system.
IMPORTANT
To Next Page
Loading...
