D
OPERATION
4
1. Confirm that left and right brake
pedals are interlocked when two
brake pedals are installed.
Make sure to interlock left and right
brake pedals unless working in a
field.
2. Lift an implement.
3. Place main and sub shift lever into
the desired position.
4. Depress brake pedal to release
parking brake.
5. Use throttle lever or pedal to
increase engine speed.
▶ STARTING OFF
To shift during driving, depress the
brake pedal to stop the vehicle in
advance.
When two brake pedals are installed.
1. To turn in a field, release hook for
left and right brake pedals.
2. Turn steering wheel and depress
brake pedal for desired direction.
3. While turning, keep engine speed
low and turn slowly.
When single brake pedal is installed.
Turn steering wheel to desired direction.
▶ SHIFTING AND DRIVING
▶ TURNING IN FIELD
2. OPERATING TRACTOR
The driving speed in the reverse
direction is almost the same to the
speed in the forward direction.
Make sure to check the surroundings
carefully when driving backward.
Especially, never drive backwards with
the sub shift lever in the position high
speed.
The driving speed becomes faster and it
can cause an accident.
Connect the left and right brake pedals
when it is about to drive when two
brake pedals are installed.
WARNING
Avoid turning at a high speed. The
tractor can fall on its side.
When the tractor is installed with an
implement, its overall length becomes
large. Be extra care with other people
and objects around when turning.
WARNING
CONNECT
BRAKE
CONNECT
BRAKE
To Next Page
Loading...
