E
MAINTENANCE
E
3
To prevent any possible failure, some
items should be checked daily.
Make sure to perform inspection before
driving.
Inspect each part in the following order:
1. Check the items that were faulty
yesterday
2. Go around the tractor and check:
- Lamps for proper illumination and
damage
- Tires for inflation pressure, crack,
damage and wear
- Rotating parts, including tires, for
loose bolts and nuts
- Transmission fluid level
- Implement attachment status
- Pre-cleaner for cleanness
3. Open the hood and check:
- Engine oil level
- Coolant level
- Fan belt for looseness and damage
- A/C belt for looseness and damage
4. Sit on the driver's seat, turn the
main switch to the "ON“ position
and check:
- Fuel gauge for proper operation
- Fuel level
- UREA Level gauge
- Engine oil and charge warning
lamps for blinking operation
- Turn signal lamp
- Horn operation
- Brake pedal free play
- Clutch pedal play
5. Start the engine, drive the tractor
slowly and check:
- Emission color
- Brake pedal operation
- One brake pedal operation
- Heaviness and vibration of
steering wheel
- Coolant gauge operation
- Hydraulic operation of 3-point link
▶ INSPECTION ITEMS
2. INSPECTION ITEMS
To Next Page
Loading...
