E
MAINTENANCE
E
11
▶ FUEL
(2) How to bleed fuel system
It is necessary to bleed the system
under the following conditions:
- The engine is stopped due to the
empty fuel tank.
- The filter or pipe is removed.
Bleed the system according to the
following procedures:
① Disconnect the connector.
② Press the priming pump repeatedly
to bleed the system.
Use only low sulfur or ultra low sulfur
diesel fuel.
(1) Fuel filler port
4. Run the engine for approx. 5
minutes and check for proper
operation through the engine oil
warning lamp on the instrument
cluster.
Then, stop the engine. (This
warning lamp should be turned off
while the engine is running.)
5. Check the oil level with the dipstick
again.
If still insufficient, add more.
When checking the fuel system or
fueling, keep flammable items, such as
a lit cigarette, away from the tractor.
The tractor may catch fire.
DANGER
FUEL FILTER PORT
CONNECTOR
PRIMING PUMP
To Next Page
Loading...
