TYM T954 - Page 14

A
GENERAL INFORMATION
• GENERAL CONSTRUCTION
The transmission case, clutch, clutch
housing, engine and front axle support
are bolted together to form a rigid unit.
• FRONT AXLE & WHEEL
The 4WD front axle is a center-pivot,
reverse eliot type.
The front wheel drive mechanism is
incorporated as a part of the axle.
The front wheel drive power is taken off
the rear transmission and transmitted
to the differential in the front axle where
the power is divided into right and left
and to the respective final cases.
In the final cases, the transmitted
revolution is reduced by the level gears
to drive the front wheel.
The 4WD mechanism with level gears
provides wider steering and greater
durability.
▶ DESCRIPTION
• ENGINE
The tractors are fitted with fuel efficient
turbo charged engines with 4 cylinders
of T854/T954/T1004/T1054/T1104
designed by DOOSAN INFRACORE
engines company.
• TRANSMISSION
Tractor with IPTO(Independent Power
Take Off) are fitted with hydraulic clutch
assy.
The transmission gear box of
T854/T954/T1004/T1104/T1054(EU),
T954/T1054/T1104(US) has 32 Forward,
32 Reverse.
Presently, TYM Tractors are fitted with
partial synchro mesh type gears.
• BRAKES
TYM tractors are provided with
independent disc brakes operated by
two brake rods’ movement.
Use parking brake lever in case of
parking the tractor.
• REAR AXLE & WHEELS
This is mounted on ball bearings and is
enclosed in removable housing which
are bolted to the transmission case.
The rim & disc fitted with rear tires are
bolted to the outer flange of rear axle.
• HYDRAULIC SYSTEM & LINKAGES
TYM tractors are fitted with Live (i.e.
system is in operation even when clutch
is disengaged.) independent, very touch
of hydraulic System.
Three point Linkages can be used for
category 2 type of implements.
• STEERING
It consists of hydrostatic power steering
system, which has a hydraulic cylinder
and tandem type hydraulic pump.
8