C
TRACTOR INSTRUMENTS
C
3
It is used to start and stop the engine.
• OFF position
Initial position. The ignition key can
be inserted and removed in this
position.
If this switch is turned to this "OFF"
position during driving, the engine
stops and the key can be removed
from the switch.
• ON position
Engine running position.
The electric circuit is activated.
• START position
Engine starting position.
When releasing the key, the switch is
returned to the "ON" position.
▶ MAIN SWITCH
1. When the Forced DeSOx switch is
set in the neutral position, the
DeSOx operation is automatically
performed for every 200 hours.
While DeSOx operation is
automatically performed,
on the instrument panel is
illuminated.
2. Forced DeSOx operation OFF
When the DeSOx operation is
performed, the exhaust gas
temperature rises to a high level.
Therefore, set forced DeSOx switch
to OFF position when working in a
greenhouse or an enclosed area
▶ DeSOx SWITCH AND OPERATING
DESCRIPTION
To start the engine, set the PTO switch
in the OFF position, the shuttle shift
lever in the neutral position and depress
the clutch pedal fully in advance.
IMPORTANT
KEY SWITCH
OFF ON
To Next Page
Loading...
