Tynetec Altec Response - Audio Setup Mode; Radio Device Test Mode

DocNo.FM0548issueBPage7
7.RADIODEVICETESTMOD
E

FromtheMainMenudisplayselect  Radio Devices  andpresstheENTERkey.
Pressthekeytoselect Radio Test  andpresstheENTERkey.
Radio Devices


Radio Test

Exit
Thedisplaywillpromptyouto“Trigger the Sensor”.
Radio Test
Trigger Sensor :))

Exit

Activatethedevicetobetested.
Thedisplaywillshowthedevicetype,it’s8digitIDnumberandSlotnumber.
Toexitthemodeselect Exit  thenpresstheENTERkey.
8.AUDIOSETUPMOD
E
FromtheMainMenudisplayselect  Audio Setup  andpresstheENTERkey,thedisplaywillshow;
Audio Setup 

Speech


Siren

Key Click

PressENTERandamessagewillannounce“Test123”atthecurrentvolumelevel.
Usethekeystoincrease/decreasethespeechvolumelevel.
PresstheENTERkeyagaintocheckthenewlevel.

Pressthekeytoselect  Siren  andpresstheENTERkey,thesirenwillsoundatthecurrentvolumelevel.
Usethekeystoincrease/decreasethesirenvolumelevel.
PresstheENTERkeytocheckthenewlevel.

Pressthekeytoselect  Key Click  thenpressthekeystoseton“”oroff“X”.
Scrolldownpast Key Click  andthedisplaywillshow;
Audio Setup 

Location Speech


Mute Time : 20
Apply
Pressthekeystosetthelocationspeechmessageon“”oroff“X”.
Pressthekeytoselect Mute Time: 120  thenpresstheENTERkey.
Usethekeystoselecteachdigit(0‐9)ofthemutetime(inseconds)andusethekeystomovebetweendigits,then
presstheENTERkey.
Pressthekeytoselect  Apply  thenpresstheENTERkey.
Thiswillalsoexitthemenu.