Tynetec Altec Response - View System Log

DocNo.FM0548issueBPage8
9.VIEWSYSTEMLOG
Detailsofthelast128alarmcallsarestoredinmemory.
FromtheMainMenudisplayscrolldownto System Log  andpresstheENTERkey.
Main Menu V1.00A

Radio Devices
Audio Setup

System Log

Thedisplaywillshowdetailsofthelastalarmcall,seeexamplebelow;
System Log 004
Exit 
Smoke Alarm
Room 000010

Hallway

Usethekeystoscrollback/forwardtoviewpreviousalarms.
Pressthekeytoexitthemode.
10.LOADDEFAULT
S

FromtheMainMenudisplayscrolldownto Load Defaults  andpresstheENTERkey.
Main Menu V1.00A


Load Defaults

Create Sensor
Exit
ThedisplaywillshowtheLoadDefaultsoptions;
Load Defaults 

System Defaults
X

Radio Defaults
X
Log Defaults
X
Scrolldownpast Log Defaults  andthedisplaywillchangeto;
Load Defaults


Sensor Defaults
X

Power Off
X
Apply
Selectthe“Defaults”youwanttoloadthenpressthekeystoseton“”oroff“X”.
 System Defaults  clearsallprogrammingfrommemory
 Radio Defaults  clearsallradiodevicesfrommemory
 Log Defaults  clearsallalarmcallhistoryfrommemory
 Sensor Defaults  clearsallcustomsensorsfrommemory(seesection13)
 Power Off  TurnstheAltecResponseunitoff(seesection12)
Multipledefaultscanchosenwitha“”andappliedsimultaneously.
Pressthekeytoselect Apply  thenpresstheENTERkey.
Thiswillalsoexitthemenu.