5
Use the original manufacturer’s USB cable that came with your
device and plug into one of the USB output ports. You can use
both USB ports to charge two devices at the same time. One
of the ports is a Type-C socket, which has a maximum output
of 2A at 9V and 2.6A at 5V. The other
has a maximum output of 2.4A. Press
the power button once to begin charging
your device. The power level indicator
will show the battery level and will turn off
after 30 seconds.
To check the power capacity again, simply press the power
button once.
Press the power button once to enable
wireless charging function. Place the device
on top of wireless charging icon to start. You
may need to adjust the orientation to have the
best charging.
NOTE: The wireless charging feature only works on devices
that allow Qi (inductive) wireless charging. Only use the
wireless charging pad with Qi-certied devices.
CHARGING YOUR USB DEVICES:
WIRELESSLY CHARGING YOUR DEVICES:
Green Indicator Light Status Meaning
Solid Standby
Fading Wireless charging mode on
Flashing Abnormal object on charging zone
To Next Page
Loading...
Need help?
General
