u-blox M8 Series User Manual

000000 NEO-M8L - Hardware integration manual
UBX-16010549 - R08 Appendix Page 25 of 28
C1-Public
B Recommended antennas
Manufacturer
Order no.
Comments
Hirschmann (www.hirschmann-car.com)
GLONASS 9 M
GPS+GLONASS active
Taoglas (www.taoglas.com )
AA.160.301111
36 x 36 x 4 mm, 3-5 V 30 mA active
Taoglas (www.taoglas.com )
AA.161.301111
36 x 36 x 3 mm, 1.8 to 5.5 V / 10 mA at 3 V active
INPAQ (www.inpaq.com.tw)
B3G02G-S3-01-A
2.7 to 3.9 V / 10 mA active
Amotech (www.amotech.co.kr)
B35-3556920-2J2
35 x 35 x 3 mm GPS+GLONASS passive
Amotech (www.amotech.co.kr)
A25-4102920-2J3
25 x 25 x 4 mm GPS+GLONASS passive
Amotech (www.amotech.co.kr)
A18-4135920-AMT04
18 x 18 x 4 mm GPS+GLONASS passive
INPAQ (www.inpaq.com.tw)
ACM4-5036-A1-CC-S
5.2 x 3.7 x 0.7 mm GPS+GLONASS passive
Additional antenna Manufacturer: Allis Communications, 2J, Tallysman Wireless
Table 5: Recommend antennas

u-blox M8 Series Specifications

General

Update Rate	Up to 10 Hz
Supply Voltage	2.7 V to 3.6 V
GNSS	GPS, GLONASS, BeiDou, Galileo, QZSS
Sensitivity	Tracking & navigation: -167 dBm, Cold start: -148 dBm
Operating Temperature	-40°C to +85°C
Assisted Start	AssistNow Online and AssistNow Offline services
Interface	UART, SPI, DDC (I2C), USB
Receiver Type	72-channel