u-blox NORA-W10 Series - Dual-Band Antennas

NORA-W10 series - System integration manual
UBX-22005601 - R04 Pre-approved antennas list Page 50 of 56
C1-Public
Wi-Fi / Bluetooth / Bluetooth LE board antenna, PN PRO-IS-237
Manufacturer
Abracon
Gain
+3.0 dBi
Impedance
50 Ω
Size
27 x 12 mm (triangular)
Type
Patch
Cable length
100 mm
Connector
U.FL. connector
Comment
Should be attached to a plastic enclosure or part for best
performance.
To be mounted with a U.FL connector.
For information on how to integrate the U.FL connector, see RF
connector design. This reference design must be followed to
comply with the NORA–W1 FCC/IC modular approvals.
Approval
FCC, IC, RED, UKCA, MIC, NCC, KCC, ANATEL, ACMA, and ICASA
7.2.1 Dual-band antennas
Wi-Fi / Bluetooth / Bluetooth LE board antenna, PN PRO-IS-299
Manufacturer
Abracon
Gain
+3.0 dBi
Impedance
50 Ω
Size
27 x 12 mm (triangular)
Type
Patch
Cable length
100 mm
Connector
U.FL. connector
Comment
Should be attached to a plastic enclosure or part for best
performance. Dual-band (2.4 GHz / 5 GHz) antenna to be mounted
with a U.FL connector. For information on how to integrate the U.FL
connector, see RF connector design. This reference design must be
followed to comply with the NORA–W1 FCC/IC modular approvals.
Approval
FCC, IC, RED, UKCA, MIC, NCC, KCC, ANATEL, ACMA, and ICASA
Wi-Fi / Bluetooth / Bluetooth LE board antenna, PN PRO-IS-432
Manufacturer
Abracon
Gain
+3.0 dBi
Impedance
50 Ω
Size
24x22x1 mm with mounting hole
Type
Patch
Cable length
100 mm
Connector
U.FL. connector
Comment
Should be attached to a plastic enclosure or part for best
performance. Dual-band (2.4 GHz / 5 GHz) antenna to be mounted
with a U.FL connector. For information on how to integrate the U.FL
connector, see RF connector design. This reference design must be
followed to comply with the NORA-W10 FCC/IC modular approvals.
Approval
FCC, IC, RED, UKCA, MIC, NCC, KCC, ANATEL, ACMA, and ICASA