73
Blast Chiller Touch Screen Manual
73
Rev08/04/2015
Meanwhile the power consumption on that relay output will appear in the
row ENERGY, to monitor if there is any absorption by the component
supplied by relay 1 and how much the absorption is.
NOTE: When using an additional contactor or power relay connected
on the power board, the power absorption will not show the actual
power pulled by the electrical load connected with that contact or
power relay.
Press again the PLAY button to activate relay #2, or STOP to de-activate the
relay. Press on the music icon to test the buzzer.
To Next Page
Loading...
Need help?
General
