Ubee Interactive Using the User Default Option
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014 28
To restore user defaults:
1. Click Status from the main menu.
2. Click User Default from the left side menu. Field descriptions are listed below the
screen example.
Label Description
Restore User Defaults Restores settings to factory defaults. Select Yes, then Apply, to
have the device to the default Firewall and Parental Control
Content Filter settings. This operation does not require a reset
(power cycle) of the system.
Reset The System Resets the system. Select Yes to power cycle the device.
When you select Apply, you will be notified that the device has
been reset. Click RELOAD
. The Login screen will then appear.
Apply Applies the options selected on the screen.
To Next Page
Loading...
