Ubee Interactive Using the User Default Option
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014 27
4.5 Using the User Default Option
The User Default option allows you to restore factory defaults to the Firewall and
Parental Control settings. All other networking settings are not cleared and reset (for
example, wireless settings).
Utility Provides a drop-down menu to choose Ping or Traceroute.
Target Defines the specific IP address or domain (for example,
ubeeinteractive.com) to which you want to trace a route.
Max Hops Defines the maximum number of hops. Hops are the number
of routers the traceroute traverses. Default is 30.
Data Size Defines the data size to send for the traceroute operation.
Default is 64.
Base Port Defines the destination port number. Default is 33434.
Resolve Host Enable (on) or disables (off) this option. When checked,
traceroute tries to find the name that matches the IP address.
Default is Off.
Start Test/Clear Results Defines what you want to do.
Start Test begins the traceroute.
Clear Results deletes previous test results in the Results
table.
Results Displays the results of the trace.
To Next Page
Loading...
