Ubee Interactive Connecting Devices to the Network
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014 13
3. Power on your PC. The PC must have an Ethernet network adapter or Ethernet port
and an Internet browser installed, such as Internet Explorer. The following browsers
are supported:
For Windows 2000, XP, Vista, Windows 8, Windows 7, Google Chrome, Firefox
1.07 and higher, Internet Explorer v7 and above.
For MAC OS X, 10.2, and higher, Firefox 1.07 and higher, Safari 1.x and higher.
4. Connect the power cable included in the product package to the back of the DDW365
and plug the other end into a power outlet.
5. Connect the network cable included in the product package to your computer’s
Ethernet port. Connect the other end to the ETH1, ETH2, ETH3, or ETH4 port on the
DDW365.
6. Connect a coaxial cable from the CABLE connector on the back of the device to the
cable wall outlet, or to a cable splitter connected to the wall outlet.
7. Validate the network connection using the device LEDs to confirm operations.
The WiFi LED must be flashing or solidly lit.
The PWR, DS/US, and ONLINE LEDs are solidly lit.
Refer to Understanding LED Behavior on page 5 for more information.
2.2 Connecting Devices to the Network
Use the instructions below to connect network devices and validate device functionality.
See the following topics:
Connecting an Ethernet Device on page 13
Connecting a Wireless Device on page 14
2.2.1 Connecting an Ethernet Device
You can connect up to three additional Ethernet devices to the DDW365.
To connect another Ethernet device to the network:
1. Connect the Ethernet cable from the Ethernet device (for example, a PC or gaming
console) to an open Ethernet port on the back of the DDW365.
2. Use the device LEDs to confirm operations. Refer to Understanding LED Behavior on
page 5 for more information.
3. Open a Web browser and go to any Web site to validate network/Internet connectivity
(for example, http://www.wikipedia.org).
To Next Page
Loading...
