Ubee Interactive Using the Advanced Option
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014 74
Label Description
54g™ Mode Selects the network mode in which to run the DDW365. The
options are:
54g auto – self adaptive connection
54g performance – highest speed
54g LRS – limited speed
802.11b – connections to 11b clients only.
This field can be set only if 802.11-n Mode is set to Off in the
Radio screen as discussed on Using the Wireless Radio Option
on page 66.
XPress™ Technology Enables or disables the XPress feature. XPress™ is a
standards-based frame-bursting approach to improve 802.11g
wireless LAN performance developed by Broadcom. When
Xpress enabled, aggregate throughput can improve up to 27%
in 802.11g-only networks, and up to 75% in mixed networks
comprised of 802.11g and 802.11b standard equipment.
802.11n Protection Defines the 802.11n Protection setting.
Auto - the DDW365 uses Request to Send/Clear to Send
(RTS/CTS) to improve the performance in 802.11 mixed
environments.
Off - the 802.11 performance is maximized under most
conditions, while the other 802.11 modes (802.11b, etc.) are
secondary.
Short Guard Interval Defines a transmission interval so data transmissions do not
interfere with each another.
Basic Rate Set Selects the rate that all wireless clients must support to connect
to the DDW365. The options are All and Default.
Multicast Rate Specifies the rate at which multicast packets are transmitted and
received on your wireless network.
To Next Page
Loading...
