Ubee Interactive Using the User Default Option
Ubee DDW36C Advanced Wireless Gateway MSO Operations Guide • October 2015 31
4.6 Using the User Default Option
The User Default option allows you to restore the DDW36C to the factory default values.
To restore factory defaults:
1. Click Status from the main menu.
2. Click User Default from the left side menu. Field descriptions are listed below the
screen example.
Label Description
Restore User Defaults Restores settings to factory defaults. Select Yes to have the
device reset all configured options in the device to factory
default settings. The device reboots if Reset The System is
also selected.
Reset The System Resets the system. Select Yes to power cycle the device.
When you select Apply, you will be notified that the device has
been reset. Click RELOAD. The Login screen will then appear.
Apply Applies the options selected on this screen.
To Next Page
Loading...
