Ubee Interactive Using the Time Option
Ubee DDW36C Advanced Wireless Gateway MSO Operations Guide • October 2015 45
5.8 Using the Time Option
The Time option allows you to configure the system time obtained from the network
servers via Simple Network Time Protocol (SNTP). SNTP is a protocol for synchronizing
the clocks of computing devices over networks. The device must be reset for changes to
take effect.
To configure system time:
1. Click Basic from the main menu.
2. Click Time from the left side menu. Field descriptions are listed below the screen
example.
Label Description
Enable SNTP Enables (Yes) or disables (No) the SNTP feature.
Current Time Displays the current system time.
System Start Time Displays the accumulated time since the system was started.
Time Server 1 Defines the IP address or domain name of the time server.
Use the one provided or enter an alternative choice.
Time Server 2 Defines the IP address or domain name of the time server.
Use the one provided or enter an alternative choice.
To Next Page
Loading...
