Ubee Interactive Using the Forwarding Option
Ubee DDW36C Advanced Wireless Gateway MSO Operations Guide • October 2015 57
6. Click Apply. The forwarding rule is created and displayed in the table as shown
below. Additional field descriptions follow.
External End Port Defines the port number to end the range of ports published to
Internet.
Note: Be very careful with ranges. Ports within a range are not
usable by other applications that may require them. It is
common and safer to enter the same port number as the start
and end of the range.
Protocol Selects the protocol type. Options are UDP, TCP, or BOTH.
Description Specifies the forwarding rule name.
Enabled Disables (Off) or enables (On) the forwarding rule.
Cancel Stops the forwarding rule creation process and returns you to
the previous Forwarding screen.
Apply Saves changes.
Port Map Shows a list of common applications and their ports.
Forwarding Table – Lists existing forwarding rules.
Remove All Deletes all entries in the forwarding table.
Label Description
Remove All Deletes all entries in the forwarding table.
Edit Displays fields for the rule selected in order to change values.
Remove Deletes the selected rule.
To Next Page
Loading...
Need help?
General
