Ubee UBC1329AA00 Advanced Wi-Fi 6 Voice Gateway User Manual • February 2021 87
Label Description
More
When you click on more
, a description of the screen information is shown. Click less to
shrink the description box again.
Port
Triggering
Select Enable to turn on the port triggering feature or Disable to turn it off.
Add Port
Trigger
Click on ADD PORT TRIGGER to configure a new port trigering rule:
The Add Port Trigger page let’s you configure port triggering rules.
Service Name: Enter a name for the port triggering rule in the space provided.
Service Type: Select the appropriate protocol: TCP/UDP, TCP or UDP.
Trigger Port From: Enter the starting trigger port, which is the first port in a range of
port numbers that will trigger the rule to start when a connection request from
outgoing traffic is made.
Trigger Port To: Enter the ending trigger port, which is the last port in a range of port
numbers that will trigger the rule to start when a connection request from outgoing
traffic is made.
Note: If only one port is used, enter the same port number in both fields.
Target Port From: Enter the starting target port, which is the first port in a range of
port numbers that will be opened when triggered.
Target Port To: Enter the ending target port, which is the last port in a range of port
numbers that will be opened when triggered.
Note: If only one port is used, enter the same port number in both fields.
To Next Page
Loading...
Need help?
General
