Ubiquiti EdgeRouter 4 User Manual

Accessing the EdgeOS Configuration Interface
1. Connect an Ethernet cable from the Ethernet port of your
computer to the port labeled eth0 on the EdgeRouter.
2. Configure the Ethernet adapter on your host system with a
static IP address on the 192.168.1.x subnet.
3. Launch your web browser. Type https://192.168.1.1 in the
address field. Press enter (PC) or return (Mac).
4. The login screen will appear. Enter ubnt in the Username
and Password fields. Read the Ubiquiti License Agreement,
and check the box next to I agree to the terms of this License
Agreement to accept it. Click Login.
The EdgeOS® Configuration Interface will appear, allowing
you to customize your settings as needed. You can click the
Wizards tab to access the Setup Wizard.
For more information, refer to the EdgeOS User Guide, which is
available at www.ubnt.com/download/edgemax

Ubiquiti EdgeRouter 4 Specifications

General

RAM	1 GB DDR3
Flash Storage	4 GB eMMC
Max Power Consumption	13W
Operating System	EdgeOS
Operating Temperature	-10 to 45° C (14 to 113° F)
Operating Humidity	10 to 90% Noncondensing
Certifications	CE, FCC, IC
Ports	3 x Gigabit RJ45, 1 x SFP
Power Input	12VDC, 1A Power Adapter (Included)
Power Method	External AC/DC Adapter