Ubiquiti EdgeRouter X ER-X User Manual

Introduction
Thank you for purchasing the Ubiquiti Networks®
EdgeRouter
™
X. This Quick Start Guide is designed to guide
you through installation and also includes warranty terms.
Package Contents
Advanced Gigabit
Ethernet Router
Model: ER-X
EdgeRouter X Power Adapter
(12V, 0.5A)
Quick Start Guide
Installation Requirements
• For indoor applications, use Category 5 (or above) UTP
cabling approved for indoor use.
• For outdoor applications, shielded Category 5 (or above)
cabling should be used for all wired Ethernet connections.
To enhance ESD protection, attach a ground wire (not
included) to the back panel of the EdgeRouter X.
We recommend that you protect your networks from
harmful outdoor environments and destructive ESD events
with industrial‑grade, shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable
Note: Although the cabling can be located outdoors,
the EdgeRouter X itself should be housed inside a
protective enclosure.
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer’s
responsibility to follow local country regulations, including operation within legal frequency
channels, output power, indoor cabling requirements, and Dynamic Frequency Selection
(DFS) requirements.

Ubiquiti EdgeRouter X ER-X Specifications

General

Model	EdgeRouter X ER-X
Category	Network Router
Ports	5 x Gigabit Ethernet
Processor	Dual-Core 880 MHz MIPS1004Kc
RAM	256 MB DDR3
Flash Storage	256 MB NAND
Max Power Consumption	5W
Operating System	EdgeOS
Operating Temperature	-10 to 45° C (14 to 113° F)
Operating Humidity	10 to 90% Noncondensing
Certifications	CE, FCC, IC
Switching Capacity	1 Gbps
Power Input	12V DC, 0.5A
Power Method	Passive PoE
Dimensions	110 x 75 x 22 mm (4.33 x 2.95 x 0.87 in)