Screw Anchors (Qty. 4) Gigabit PoE Adapter (48V,
0.5A)*
Power Cord*
* Included only in the single-pack of the UAP-AC-M-PRO
Installation Requirements
13 mm wrench (for pole mounting)
Drill and 8 mm drill bit (for wall mounting)
Phillips screwdriver (for wall mounting)
Cable feed must be pointed downwards when mounted.
Shielded Category 5 (or above) cabling should be used for all outdoor wired Ethernet
connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit ui.com/toughcable
Surge protection should be used for all outdoor installations. We recommend that
you use two Ethernet Surge Protectors, model ETH-SP, one near the UAP-AC-M-
PRO and the other at the entry point to the building. The ETH-SP will absorb power
surges and safely discharge them into the ground.
To Next Page
Loading...
