Ublox NINA-B3 Series - Page 61

NINA-B3 series - System integration manual
UBX-17056748 - R13 Regulatory information and requirements Page 61 of 72
C1-Public
GW.26.0111
Manufacturer
Taoglas
Polarization
Vertical
Gain
+2.0 dBi
Impedance
50 Ω
Size
Ø 7.9 x 30.0 mm
Type
Monopole
Connector
SMA (M) .
Comment
To be mounted with the U.FL to SMA adapter cable.
Approval
RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
Ex-It 2400 28 RP-SMA
Manufacturer
ProAnt
Polarization
Vertical
Gain
+3.0 dBi
Impedance
50 Ω
Size
Ø 12.0 x 28.0 mm
Type
Monopole
Connector
Reverse Polarity SMA plug (inner thread and pin receptacle).
Comment
This antenna requires to be mounted on a metal ground plane for best
performance.
To be mounted with the U.FL to Reverse Polarity SMA adapter cable.
An SMA version antenna is also available but not recommended for use (Ex-IT
2400 SMA 28-001).
Approval
FCC, IC, RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
Original part number at certification: Ex-IT 2400 RP-SMA 28-001
Ex-It 2400 28 U.FL-100
Manufacturer
ProAnt
Polarization
Vertical
Gain
+2.0 dBi
Impedance
50 Ω
Size
Ø 12.0 x 28.0 mm
Type
Monopole
Cable length
100 mm
Connector
U.FL. connector
Comment
This antenna requires to be mounted on a metal ground plane for
best performance.
To be mounted with a U.FL connector.
For information about integrating the U.FL connector, see also the
Reference design for external antennas (U.FL connector). It is
necessary to follow this reference design to comply with the
NINA-B3 FCC/IC modular approvals.
Approval
FCC, IC, RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
Original part number at certification: Ex-IT 2400 MHF 28