NINA-B3 series - System integration manual
UBX-17056748 - R13 Regulatory information and requirements Page 62 of 72
C1-Public
Ex-It 2400 Foldable RP-SMA
Reverse Polarity SMA plug (inner thread and pin receptacle)
To be mounted with the U.FL to Reverse Polarity SMA adapter cable.
An SMA version antenna is also available but not recommended for
use (Ex-IT 2400 SMA 70-002).
FCC, IC, RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
Original part number at certification: Ex-IT 2400 RP-SMA 70-002
Should be attached to a plastic enclosure or part for best
performance.
To be mounted with a U.FL connector.
For information about integrating the U.FL connector, see also the
Reference design for external antennas (U.FL connector). It is
necessary to follow this reference design to comply with the
NINA-W1 FCC/IC modular approvals.
FCC, IC, RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
SMA plug (inner thread and pin)
To be mounted with the U.FL to SMA adapter cable.
EOL. Use only for legacy products.
RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
To Next Page
Loading...