22 Cocoon 951 Twin
Cocoon 951 Twin
12.3 Selecting a base unit
If your handset is subscribed to several base unit stations (max. 4) , you must select a base
unit because the handset can only communicate with one base unit at a time. There are two
possibilities:
12.3.1 Automatic selection
If you set the handset to ‘automatic selection’, the handset will automatically choose the
closest base unit in standby.
• Press the option button under ‘Menu’
.
• Press the Up or Down key / repeatedly until ‘Handset’ is selected
• Press to confirm
• Press the Up or Down key
/ repeatedly until ‘Select Base’ is selected
• Press to confirm
•Select ‘Auto’ and press to confirm.
12.3.2 Manual selection
If you set the handset to ‘manual selection’, the handset will only choose the base unit you
have set.
• Press the option button under ‘Menu’ .
• Press the Up or Down key / repeatedly until ‘Handset’ is selected
• Press to confirm
• Press the Up or Down key / repeatedly until ‘Select Base’ is selected
• Press to confirm
•Select ‘Manual’ and press to confirm.
• Select the base with the Up and Down key
/ and press ‘Save’ .
12.4 Using multiple handsets
12.4.1 Calling another handset
• Press the INT key .
•‘Handset _” appears on the display
• Dial the number of the handset you would like to call.
• After finishing your call, press the Line key to hang up.
12.4.2 Receiving an internal call
• The internal call icon and the number of the handset calling, appear on the display.
• Press the Line key to accept the internal call.
OR
• Lift the handset off its base(if the Auto answer option is active,see §“6.20 Auto answer” )
• During the call, the handset number of the caller and the symbol appear on the
display.
• After finishing your call, press the Line key to hang up.
To Next Page
Loading...
