To Next PageTo Next PageWhat to do if my UCOM COCOON 8002 has no tone?
If your UCOM Cordless Telephone has no tone, there might be several reasons: * The telephone cable might not be connected properly; check its connection. * Another handset might be using the line; wait until it hangs up. * The volume of the other party could be too low; adjust the volume during the call. * The handset ring tone volume might be too low; adjust the ring tone volume.
Why is the symbol flashing on my UCOM COCOON 8002 Cordless Telephone?
If the symbol is flashing on your UCOM Cordless Telephone, it could be due to these reasons: * The handset is out of range; move closer to the base station. * The base station has no power; check the mains adapter and cable. * The handset is not logged onto the base station; log the handset onto the base station.
How to fix a UCOM Cordless Telephone with no display?
If your UCOM Cordless Telephone has no display, it's likely due to the batteries. Check that both rechargeable batteries have been inserted correctly and ensure that they are charged. If not, charge the batteries.
General| Standby Time | Up to 100 hours |
|---|---|
| Number of Handsets | 1 |
| Caller ID | Yes |
| Call Waiting | Yes |
| Phonebook Capacity | 50 entries |
| Battery Life | Up to 10 hours |
| Conference Call | Yes |
| Display | LCD |
| Power Source | Battery and AC adapter |
Details the intended connection and DECT technology for the telephone.
Explains the Caller ID service requirement for number display on the telephone.
Lists essential safety notes for protection against electrical risks.
Warns about fire hazards from heat and risk of battery explosion.
Advises keeping batteries out of children's reach to prevent poisoning.
Instructions for cleaning the telephone with a damp or anti-static cloth.
Guidance on proper disposal of the device for recycling electrical and electronic items.
Explains the notation conventions used throughout the user guide for clarity.
Step-by-step guide for connecting the base station to power and phone line.
Instructions for connecting the mains adapter to the handset charger.
Steps for inserting batteries and initial handset charging.
Instructions for fixing the corded telephone to a wall.
Explains the indicators for battery charge status and low battery warnings.
Identifies all keys and display icons for cordless and corded handsets.
Instructions for initiating outgoing calls and redialing the last number.
How to use hands-free, mute microphone, and adjust volume.
Steps to select and set one of five ring tones.
How to transfer an ongoing call to the cordless handset.
Procedure to locate a misplaced handset using the base station.
Explains the function of the R key for call waiting and systems.
Guide to accessing and moving through the handset's menu options.
Steps to select and set the language displayed on the handset.
Instructions for configuring the date and time on the handset.
How to initiate calls and use pre-dialling with the cordless handset.
How to answer and end incoming calls on the cordless handset.
Activating and deactivating the hands-free function during calls.
Procedure to mute the microphone during a call.
Adjusting volume, setting ring tones, and activating key lock.
How to switch between Tone (DTMF) and Pulse dialling.
Procedure to change the name displayed for the handset.
Steps to store names and numbers in the phonebook.
How to call stored numbers using the phonebook.
How to modify existing contact details in the phonebook.
How to remove contacts from the phonebook.
How the display indicates a new incoming call in the call list.
Steps to open and navigate the list of incoming calls.
How to dial a number directly from the call list.
Procedures for removing single or all numbers from the call list.
How to store numbers from the call list into the phonebook.
Step-by-step guide to register a cordless handset onto the base station.
Steps to remove a registered handset from the base station.
How to transfer an external call or initiate a conference call.
How to conduct calls between cordless handsets.
How to restore factory default settings for the unit.
Solutions for common faults like no display or no tone.
Further solutions for issues like dialing errors or flashing symbols.
Details on range, battery, power, temperature, humidity, and memory.
Lists the factory default configurations for handset name, dialling mode, etc.
Details on warranty period, processing, and exclusions.
