28 Cocoon 951 Twin
Cocoon 951 Twin
Notes:
• If you do not press any keys for 8 seconds, the previous day/time setting is saved and
the machine automatically exits the day/time setting mode.
• When you use the machine for the first time and have not yet set the day/time, no day/
time registration of incoming messages is recorded.
• If there is a loss of power to the base, the day/time must be re-entered.
15.9 Checking Day/Time
• Press the key to announce the day/time. The internal voice will say the current day/
time setting.
15.10 Programming the VIP Code
The VIP code is a 3-digit code used to operate the machine remotely (see “15.16 Remote
Operation” ). The VIP code is set to '321' by default.
15.10.1 Changing the VIP Code
• Keep the - key pressed down for 2 secs to change the VIP code.
• The internal voice asks you to set the VIP code and says the first number.
• Press a few times on or keys to set the first number of the VIP code.
• Press the key to confirm the first number. The internal voice says the current set 2nd
digit of the VIP code.
• Press a few times on or keys to set the second digit of the VIP code.
• Press the key to confirm the second number. The internal voice says the current set
3rd digit of the VIP code.
• Press a few times on or keys to set the third digit of the VIP code.
• Press the key to confirm the VIP code. You will hear a long beep. The internal voice
says the new VIP code for confirmation.
Note: If you do not press any keys for 8 seconds, the previous VIP code is saved and
the machine automatically exits the VIP setting mode.
15.10.2 Checking the VIP Code
• Press the key to play the VIP code. The internal voice says the current VIP code.
15.11 Operation
If a call is received and the answering machine is turned on, the answering machine will
automatically pick up the line after the set number of rings. If
• Outgoing message 1 has been selected, it will be played. After the outgoing message, a
beep will be heard and the caller can leave a message (of a max. 3 minutes).
• Outgoing message 2 has been selected, it will be played. After the beep, the line will
automatically be disconnected.
The caller does not have the possibility to leave a
message.
The key is at the bottom of the base.
If, during pick-up, nothing is said for 8 seconds, the line will be
automatically disconnected.
To Next Page
Loading...