UCOM COCOON 951 TWIN - Caller ID;CLIP; Caller ID and Call List Features

Cocoon 951 Twin 23
Cocoon 951 Twin
ENGLISH
12.4.3 Receiving an external call during an internal call
If you receive an external call during an internal call, you will hear a call waiting tone (double
beep) on both handsets being used for an internal call.
• Press the Line key twice to accept the external call.
• After finishing your call, press the Line key to hang up.
12.4.4 Transferring a call to another handset
• You have an external caller on the line.
• Press the INT key . “Handset _” appears on the display.
• Dial the number of the handset to which you would like to transfer the call.
• If the handset dialled is answered, you can have an internal conversation. Press the
Line key and the external call is transferred.
• If the handset dialled is not answered, press the option key ‘END’ to speak to the
external caller again.
12.4.5 Conference call (two internal handsets and one external caller)
You can have a telephone conversation with one internal and one external caller at the same
time.
• While on the line with an external caller, press the INT key . The external line is put
on hold and the icon appears on the display.
• Dial the number of the handset you would like to include in the call. You can toggle
between Internal and External line by pressing the INT-key . When the 2nd handset
is put on hold while talking with the external line the icon appears on the display.
• Once the handset dialled is answered, press the option key ‘Conf.’ .
• Now you are connected to one external and one internal caller (conference call).
13 Caller ID/CLIP
When you receive a call, the telephone number of the caller, the date and time appears on
the handset display. If the name is programmed in the Phone Book, the name in the Phone
Book is displayed!
The telephone can store 30 calls in a Call List that can be reviewed later. When the memory
is full, the new calls automatically replace the oldest calls in the memory. The symbol on
the display blinks if there are calls not answered in the call list. If the Call List is empty and
you press the Up key , ‘Call list empty’ will be shown.
You can view the information of an incoming call:
• Press the Up key . The name (if sent by the network or present in the Phone Book
memory) of the caller will be shown on the first line. The telephone number of the caller
on the 2nd line and date and time on the 3rd line. At the end of the 3rd line you also have
the indication of the following:
–
Unread or unanswerd call
– Read or answered call
2
2
12
2
13
12
12
13
This service only works when you have a Caller ID/Clip subscription.
Contact your telephone company for more information.
3
3