UCOM Twintalker 4700 3
UCOM Twintalker 4700
ENGLISH
1Introduction 4
2 Intended purpose 4
3 CE Mark en restrictions 4
4 Safety instructions 4
4.1 General 4
4.2 Burning injuries 5
4.3 Injuries 5
4.4 Danger of explosion 5
4.5 Poisoning danger 5
4.6 Legal 6
4.7 Notes 6
5 Cleaning and maintenance 6
6 Disposal of the device (environment) 6
7 Using a PMR device 7
8 Included in the package 7
9 Getting started 8
9.1 Installing/Removing the Belt Clip 8
9.2 Battery Installation 8
10 Battery Charge Level 8
11 Buttons 9
12 LCD Display information 10
13 Using the Twintalker 4700 10
13.1 Turning the Unit ON/OFF 10
13.2 Adjusting Speaker Volume 10
13.3 Receiving a Signal 10
13.4 Transmitting a Signal 11
13.5 Changing Channels 11
13.6 CTCSS (Continuous Tone Coded Squelch System) 11
13.7 VOX Selection 12
13.8 Call Tones 12
13.9 Roger Beep On/Off 12
13.10 Automatic Power Off (APO) 13
13.11 Monitor 13
13.12 Channel Scan 13
13.13 Button Lock 13
13.14 Display backlight 13
14 Connection for optional earpiece and charger 14
15 Troubleshooting 14
16 Technical specifications 15
17 Service address and hotline support 15
18 Declaration of conformity and manufacturer 15
19 Warranty 16
19.1 Warranty period 16
19.2 Warranty handling 16
19.3 Warranty exclusions 16
To Next Page
Loading...