Uconnect 5.0 - Making A Phone Call; Receiving A Call - Accept (And End)

• Both the SIM card and the mobile phone’s phonebook
is downloaded. SIM card phonebook is not part of the
Mobile phonebook. It is possible that the SIM card
phonebook may not be downloaded depending on the
mobile phone and the phone’s software.
• This downloaded phonebook cannot be edited or
deleted on the Uconnect®. These can only be edited on
the mobile phone. The changes are transferred and
updated to Uconnect® Phone on the next phone
connection.
Making A Phone Call
Push the “Phone Pick-up” button on the steering
wheel.
After the BEEP, say “dial” a number (or “call” a name).
Receiving A Call — Accept (And End)
When an incoming call rings, or is announced on
Uconnect®, push the “Phone Pick-up” button.
To end a call, push the “Phone Hang-up” button on the
steering wheel or the “Answer” button on the radio
touchscreen.
Mute (Or Unmute) Microphone During Call
During a call, push the “Voice Command” button
on the steering wheel.
After the BEEP, say “mute” to mute the microphone (or
“mute off” to un-mute the microphone).
Transfer Ongoing Call Between Handset And
Vehicle
During a call, push the “Voice Command” button.
After the BEEP, say “transfer call.”
5
Uconnect® PHONE 39