Transmitter preparation
Installation of TF Card
Landing gear installation
Installation: Aim the landing gear frame to the body and
place it to the right place.
Disassembly：Pull out the landing gear.
Note: Make the landing gear close to the fuselage
surface of the drone, otherwise it will be
unstable and affect the stability of the drone.
Insert the TF card to the slot of camera, and pay attention to the metal contact
surface orientation of the TF card.
* TF card is not included
Video
Left stick
(Press down to trimmer)
GPS Switch
Right stick
Power Switch Return Botton
Speed Switch
Phone Holder
Following Mode Encircling Mode
Gimbal Rotary Button
Photo
4
To Next Page
Loading...
