ULTIMATE SPEED ULGD 5.0 E3 - EC Declaration of Conformity

GB
19
Please note the marking on the different packaging materials
and separate them as necessary. The packaging materials are
marked with abbreviations (a) and digits (b) with the following
definitions: 1–7: Plastics, 20–22: Paper and cardboard,
80–98: Composite materials.
z EC Declaration of Conformity
We,
C. M. C. GmbH Holding
Responsible for documentation:
Dr. Christian Weyler
Katharina-Loth-Str. 15
66386 St. Ingbert
Germany
hereby take sole responsibility for declaring that the product
Car & motorcycle battery charger
Year of manufacture: 2023/51
IAN: 435920_2304
Model: ULGD 5.0 E3
Model number: 2620
meets the basic safety requirements as specified in the European
Directives
Low Voltage Directive
2014/35/EU
Electromagnetic Compatibility
2014/30/EU
RoHS Directive
2011/65/EU + 2015/863/EU
and the amendments to these Directives.
The object of the declaration described above meets the requirements of
Directive 2011/65/EU of the European Parliament and of the Council of
8 June 2011 on the restriction of the use of certain hazardous substances
in electrical and electronic equipment.
This conformity assessment is based on the following harmonised
standards:
EN IEC 60335-2-29:2021+A1:2021
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+
A14:2019+A2:2019+A15:2021
EN 62233:2008
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019+A2:2021