12 GB/IE/NI/CY/MT
age and temperature.
A charging process is then
only possible if all test criteria
have been met.
Do not use adapter plugs or
extension cables. The device
must be plugged directly into
the fixed socket.
The electrical system
and the socket, which
are provided for charging
electric cars, must be
checked by an electrician
before use.
Only use the device in an
ambient temperature between
-25 °C and 45 °C.
Only use mobile charging
stations
1
up to height of
4,000 m above sea level.
A slightly higher temperature
during charging is
absolutely normal and
not a malfunction.
Protect the mobile charging
station
1
from moisture
and high temperatures,
including fires.
Store the mobile charging
station
1
in a dry place
and protect the device from
moisture and corrosion.
Do not drop the mobile
charging station
1
while
it is being used.
The mobile charging station
1
is designed for electric
cars with type 2 plug (in
accordance with EN 62196-2).
When using the mobile
charging station
1
make sure
that the connector plugs
7
and
9
are securely in place.
There is a hole for hanging the
charger on the wall. It’s highly
recommended that the user hangs
the charger on the wall for nor-
mal usage. If not, please make
sure the height of the wall socket
from the ground is no longer
than the length of the input wire
to avoid strain on plug
7
and
socket.
Electromagnetic
compatibility
The Mobile Charging Station
meets the requirements for use
in residential areas according to
EN 61000-6-3:2020.
z Using the device
Start the charging process:
Unwind the charging cable
6
.
Plug the mains plug
7
into the
230 V mains socket.
The digital charging display
3
indicates that a car is not yet
connected:
To Next Page
Loading...
Need help?
General
