ULTIMEA Poseidon E40 - Power Supply

●
To prevent overheating, do not block or clog the
ventilation openings.
●
Never place this device in a conned space. Always
leave enough space around this device for ventilation.
●
Avoid overexposing this device to direct sunlight,
heat, large temperature fluctuations, and moisture.
Avoid extreme temperatures.
●
When this device is running for a long period of time,
the surface may become hot. If this occurs, shut it
down immediately and unplug the charger. Resume
operation after the device has cooled down.
●
Always handle this device with care. Avoid touching
the lens.
●
Do not allow children to handle the device without
supervision.
●
No not place heavy or sharp objects on this device.
●
To avoid electric shock, do not disassemble the evice.
●
Avoid extreme vibration. It may damage the internal
components.
●
Only use attachments or accessories specied by the
manufacturer.
●
Please comply with the laws and regulations of the
country and region where the equipment is located
(used), observe professional ethics, pay attention to
safety obligations, and strictly prohibit the use of our
products or equipment for any illegal purpose.
●
When using a projector in a dark environment, be
mindful of the safety of your audience. Ensure that
equipment such as projectors and power cords are
placed in locations where they cannot be easily tripped
over or touched, and avoid crossing cords to minimize
safety risks.
●
Use only the provided power adapter.
●
Power off the device before removing the power
supply from the socket.
●
Protect the power cord from being walked on or
pinched, particularly at plugs.
●
Unplug this device if there are lightning storms or
when unused for a long period of time.
●
Before you make or change any connections, ensure
that all devices are disconnected from the power outlet.
Power Supply
●
To avoid personal injury or property damage, please
comply with the instructions in this manual carefully
and do not use the product in any other way.
●
To reduce the risk of re and/or electric shock, do not
expose the device to rain or moisture. Objects lled
with liquids, such as vases, should not be placed on
this device.
●
Do not place this device on soft surfaces such as
tablecloths or carpets, otherwise the device could be a
re hazard.
●
Do not place this device in areas susceptible to
excessive dust and dirt or near any appliance generat-
ing a strong magnetic eld.
EN
04