Ultra Secure UltraDial

To Next Page

3G UltraDial GSM Alarm

Introduction

A Battery powered Weatherproof 3G GSM Wireless Alarm System with N/O & N/C Input

Trigger & Wireless Connectivity to a range of Wireless Accessories.

Key Points:

• Calls up to 3 x Key-holders by Telephone when Triggered (this can be turned off).

• Contacts up to 3 x Key-holders by SMS when Triggered (this can be turned off).

• User can Record a personal message (this will be replayed to Key-holders when the

Alarm Calls them.

• Armed & Disarmed using Remote Control (from up to 100 metres away).

• Battery Powered (can be operated using an optional Plug in Transformer).

• Volt Free N/O Input (can be used with wired N/O detectors & sensors).

• Volt Free N/C Input (can be used with wired N/C detectors & sensors).

• It can be connected to an existing Alarm Panel.

• Easy Programming (via built in keypad).

• Can operate with a Host of Wireless Detectors.

• Can trigger Wireless Sirens.

• Fully Waterproof (IP 66).

• Supplied with Security Screws and Tool (for the lid).

• It can send a Weekly Status report to the Primary Key-holder.

• Key-holder being Called can Disarm the Alarm.

• Key-holder being Called can Stop the Alarm and Re-arm.

• Uses standard size SIM Card (PAYG or Contract).

• Power Failure SMS (when used with a Plug in Transformer).

• Remote Arm & Disarm function (when used with a Plug in Transformer).

Main Page

Need help?

Do you have a question about the Ultra Secure UltraDial and is the answer not in the manual?

Summary

Get Started

Sim Card Installation

Instructions for installing the SIM card correctly into the alarm unit.

Programming Wireless Accessories

Alarm Control and Notifications

Arming the Alarm

Instructions to arm the alarm using the remote control.

Disarming the Alarm

Instructions to disarm the alarm using the remote control.

Receiving a Telephone Call

How the alarm contacts key-holders when triggered.

The UltraDial 3G GSM Alarm is a battery-powered, weatherproof wireless alarm system designed for various security applications. It features N/O (Normally Open) and N/C (Normally Closed) input triggers and wireless connectivity to a range of accessories.

Function Description:

The primary function of the UltraDial alarm is to detect intrusions and notify key-holders via telephone calls and SMS messages. When triggered, the system can call up to three key-holders and send SMS alerts. Users can record a personalized message that will be replayed to key-holders when the alarm calls them. The system can be armed and disarmed using a remote control from up to 100 meters away. It supports both wired N/O and N/C detectors and sensors, allowing integration with existing alarm panels or various other devices like water alarms, window contacts, gate contacts, and roller shutter contacts. The UltraDial can also connect to a host of wireless detectors, including standard PIRs, GSM UltraPIR Alarms, and door & window contacts, as well as trigger wireless sirens (battery-powered internal or battery/solar-powered internal/external).

Important Technical Specifications:

Wireless Frequency: 868 Mhz.
GSM Frequency: Not specified, but it operates on a 3G GSM network.
Battery Life: Approximately 6 months (using Lithium Batteries).
Dimensions: 163 x 82 x 40 mm.
Colour: Black.
IP Rating: IP66 (Fully Waterproof).
Power Source: 3 x AA Batteries (lithium recommended for external use), or external 5v DC Input (via a plug-in transformer, USB cable, or other 5v DC power supplies).
SIM Card: Uses a standard size SIM Card (PAYG or Contract). Does not support SIM card verification or PIN codes.
Remote Control Range: Up to 100 meters (line of sight).
Wireless Detector/Siren Range: 100 meters (line of sight), extendable when multiple units relay signals.

Usage Features:

Key-holder Notification: Calls and/or SMS messages to up to three key-holders when triggered.
Personalized Message: Record a 6-second message to be played during alarm calls.
Arming/Disarming: Via remote control (up to 100m range) or built-in keypad.
Input Relays: One Volt Free N/O or N/C input for wired detectors/sensors.
Easy Programming: Via built-in keypad.
Wireless Accessories: Compatible with a range of wireless detectors and sirens.
Weekly Status Report: Can send a weekly report (Battery Status, GSM Status, Armed/Disarmed) to the primary key-holder at 9 am each Monday. Requires time and date programming.
Audible Beeps: Controls audible beeps upon activation (#6# function).
Telephone/SMS Function Control: Can turn ON/OFF telephone calls (#8#) or SMS messages (#9#) independently.
Remote Arm/Disarm (with DC Input): When powered by an external DC input, the primary key-holder can remotely arm (A) or disarm (D) the alarm by sending an SMS to the SIM Card number.
Power Failure SMS (with DC Input): Notifies the primary key-holder via SMS during a power cut and when power is reconnected (requires batteries inserted).
Call Interaction: During an alarm call, pressing '#' on the receiving phone disarms the alarm and silences additional sirens. Pressing '*' prevents further calls but keeps the alarm armed and silences additional sirens.
SIM Card Insertion: Requires careful insertion of a standard-sized SIM card. The alarm will beep 5 times if no working SIM card is detected. A small LED flashes quickly for 1-2 minutes during network connection.
Programming Phone Numbers: Up to three key-holder phone numbers can be programmed using the keypad. County codes may be necessary for some SIM cards.
Full Reset: A full reset can be performed using the #369# command.

Maintenance Features:

Battery Replacement: Uses 3 x AA batteries. Lithium batteries are recommended for external installations or cold environments due to better low-temperature performance. Standard alkaline batteries can be used for internal use.
Security Screws: Supplied with security screws and a tool for the lid, ensuring tamper resistance.
Waterproof Design: IP66 rating ensures protection against water ingress.
SIM Card Check: Users are advised to ensure the SIM card works in a mobile phone for calls and texts before inserting it into the alarm.
Remote Control Deletion: Remote controls can be deleted by holding the learn button while inserting the last battery, indicated by 3 beeps.

Support:

Contact information for support is provided:

Lines Open: 08:00 - 17:00 / Mon - Fri
Tel: (01604) 589414
Email: info@ultrasecuredirect.com, technical@ultrasecuredirect.com