15
Powering ON your F77
Powering OFF your F77
To start your vehicle, follow the steps below.
Turn the key clockwise to the ON position as
shown. The motor can be armed using the
“Motor start” switch to operate the vehicle.
The console will display a loading animation
for approximately 12s during which the bike
will initialize all systems and land on the main
meter console screen. After the key is switched
ON, the motor can be armed after 2 seconds.
To start riding, press and hold the front brake
lever or the rear brake pedal along with a
long press of the “Motor start” switch. The
motor armed tell-tale will glow to conrm
that the motor is active. For your safety, F77
is equipped with the side stand motor kill
feature which restricts the motor operation
if the side stand is engaged. Ensure the
side stand is not engaged to make motor
activation possible. The motor can also be
activated by entering into the “Park assist”
through the console controls.
Bring your vehicle to a complete halt, press the
“Motor stop” switch to power off the vehicle,
and turn the ignition key anticlockwise to the
OFF position. The key should be removed from
the vehicle when not in use for the safety and
security of your vehicle.
: It is not recommended to turn
the key off while the vehicle is running
To Next Page
Loading...